Loft board is an absolutely convenient thing that allows de-cluttering the house by keeping all the unnecessary belongs in the attic. Well, the installation of loft board is a bit tricky process and if you are not going to hire an expert for this work then, of course, you’ll have to learn some DIY tips. However, for this purpose, make sure that you are physically fit as you may have to spend around 30 minutes to 1 hour on the ladder.
Take the Exact Measurements!
In most of the cases, standard boards of 2,400mm x 600mm are usually installed. However, the size varies as per the requirements of households because some people keep the size large for shifting bulky stuff. Well, the accurate measurement is vital so you should take a lead pencil and mark all the dimensions as this will help you consider every single inch. This is the first step and without it, you will not be able to buy the board of accurate size.
Check whether Insulation is required!
If you are living in a cold area like Essex where insulation ensures cosiness then, of course, the loft boarding in Essex shouldn’t be left un-insulated. Some people believe that such small section won’t make any difference but you should know that heat escapes even from very small sections like the underneath of door. The emission of gases also occurs due to the areas in the house that are usually left un-insulated whereas the energy bill also increases.
Lay the Board in a Staggered Pattern!
Adjust the position of the board in an efficient way by making sure that all the gaps are filled. The staggered position will help you identify whether it can fix well with the joining sections or not.
Get the Tools Ready!
When you lay the board, make sure that all the tools are ready so you won’t have to face any disruption. More on, the precautions are also mandatory as one shouldn’t start this work without wearing gloves and mask. These tips work well when the DIY approach is selected.